15,706 Salon Verified Editorial Cuts • Edition № 24
L'Étoile HairParis • New York

31 Copper Hair Color Ideas to Save for Later

1. Feathered Copper Shaggy Bob with Wispy Curtain Bangs

Feathered Copper Shaggy Bob with Wispy Curtain Bangs

Nothing screams effortless retro cool quite like a flicked-out shaggy bob! I love how the warm copper tones catch the light, and those feathered curtain bangs give just the right amount of breezy face-framing without feeling too heavy.

How to do this

1. Start by prepping towel-dried hair with the lightweight volumizing mousse listed below, working it from roots to ends for lift and body.

2. Blow-dry your bangs forward using a small round brush, curving them slightly under to give them a soft, feathered curtain shape that frames your eyes.

3. Using a medium ceramic round brush and your blow dryer, dry the rest of your hair in sections, pulling the ends outwards away from your neck to create that signature 70s kick and flick.

4. For extra definition on stubborn pieces, grab a flat iron or small curling wand and flick the outer ends upwards and away from the face.

5. Mist the dry texturizing spray listed below through the mid-lengths and shake your hair out with your fingers to break up the sections.

6. Finish by warming a pea-sized amount of styling paste between your palms and piecing out the ends and bangs to lock in that lived-in texture.

Products Used

Lightweight Volumizing Styling Mousse

volumizing hair mousse

View

Ceramic Thermal Round Hair Brush

ceramic round brush for blow drying

View

Dry Texturizing Spray for Volume

dry texturizing spray volume

View

Matte Finish Flexible Styling Paste

matte hair styling paste texturizing

View

Color-Depositing Copper Hair Mask

copper color depositing mask conditioner

View

2. Vibrant Copper Shaggy Lob with Choppy Brow-Skimming Bangs

Vibrant Copper Shaggy Lob with Choppy Brow-Skimming Bangs

I’m completely obsessed with this rich copper shag lob! The textured layers and piecey, brow-grazing fringe frame the face so effortlessly while giving off total cool-girl retro vibes. It’s vibrant enough to make a real statement for autumn days or date nights, but relaxed and lived-in enough to look incredible with your favorite everyday sweater.

How to do this

1. Start by prepping freshly washed, damp hair with the lightweight leave-in conditioning spray listed below to add hydration and manageability.

2. Apply a dollop of the volumizing styling mousse listed below throughout your roots and mid-lengths to encourage natural body and separation.

3. Blow-dry the bangs first using a small flat wrap or round brush to give them an effortless, slightly rounded shape that sits right at the brow line.

4. Rough-dry the rest of your hair using a diffuser attachment or blow-dryer on medium heat, twisting small sections with your fingers to build lived-in movement.

5. Take random vertical sections and use the 1.25-inch curling iron listed below to add loose, undone bends, making sure to leave the ends straight for that signature modern shag feel.

6. Finish by misting the dry texturizing spray listed below through the lengths and shaking it out with your fingers to piece out the layers and give it that cool, lived-in texture.

Products Used

Color-Safe Copper Depositing Shampoo

copper color depositing shampoo

View

Lightweight Leave-In Conditioning Spray

lightweight leave in conditioner spray

View

Volumizing Texture Styling Mousse

volumizing hair mousse

View

1.25 Inch Ceramic Curling Iron

1.25 inch curling iron

View

Dry Texturizing Finishing Spray

dry texturizing spray

View

3. Bouncy Copper Ringlets with Vivid Teal Peekaboo Streak

Bouncy Copper Ringlets with Vivid Teal Peekaboo Streak

I've always loved warm copper curls, but adding this pop of vivid electric teal took the whole look to another level! If you have naturally curly hair and want to play with fun colors without committing your whole head, a single bold accent ribbon is honestly the best way to do it. It twists right through your ringlets and peeks through whenever your hair moves, giving such a fun, playful energy that feels effortless and vibrant.

How to do this

1. Start by sectioning off a 1-inch slice of hair along the side where you want your vivid accent curl to pop.

2. Pre-lighten the isolated curl panel to a pale blonde level 9 or 10 using the gentle hair bleaching kit listed below.

3. Deposit a vivid turquoise or teal semi-permanent dye onto the bleached strand using the teal direct deposit color listed below, allowing it to process fully before rinsing with cool water.

4. Cleanse and condition all of your hair with a hydrating, sulfate-free wash routine to keep your copper base vibrant and curls intact.

5. On soaking wet hair, rake through a generous quarter-sized amount of the curl defining cream listed below from roots to ends to lock in hydration.

6. Scrunch curls upward using the microfiber hair towel listed below to remove excess moisture without causing frizz.

7. Attach the universal collapsible diffuser listed below to your blow dryer and dry on low heat, tilting your head side to side until curls are completely set and bouncy.

Products Used

Gentle Hair Bleaching Kit

gentle hair bleach lightener kit

View

Teal Direct Deposit Semi-Permanent Color

teal semi permanent hair color dye

View

Moisturizing Curl Defining Cream

curl defining cream for wavy and curly hair

View

Microfiber Anti-Frizz Hair Towel

microfiber hair towel wrap for curly hair

View

Universal Collapsible Diffuser Attachment

universal blow dryer diffuser attachment for curls

View

4. Cottagecore Copper Pigtail Braids with Face-Framing Baby Plaits

Cottagecore Copper Pigtail Braids with Face-Framing Baby Plaits

This look gives the ultimate dreamy, fairytale meadow aesthetic without demanding hours in front of the mirror! Classic low pigtail plaits paired with micro face-framing baby braids instantly take your everyday protective style and make it feel effortlessly whimsical.

How to do this

1. Start by parting clean, dry hair right down the center from your forehead all the way to the nape of your neck using the rat tail comb listed below.

2. Separate a small 1/2-inch section of hair from the front on each side of the part to create the delicate face-framing accent braids, clipping the rest of your hair out of the way for now.

3. Tightly plait each of those tiny front sections into a mini three-strand braid all the way down, securing each end with a clear mini elastic band.

4. Divide the remaining hair into two equal left and right sections. Smooth down flyaways using a dab of the lightweight smoothing hair oil listed below.

5. Braid each side into a classic, low three-strand pigtail braid, pulling firmly to keep the stitches neat and smooth.

6. Secure the ends of each main braid about three to four inches from the bottom with the clear elastic hair bands listed below, leaving a smooth, sleek tassel.

7. Finish the look by misting everything with the flexible hold hairspray listed below to lock in the romantic, cottagecore vibe.

Products Used

Fine-Tooth Rat Tail Parting Comb

rat tail parting comb precision

View

Clear Elastic Mini Hair Bands

clear elastic mini hair bands

View

Nourishing Lightweight Smoothing Hair Oil

lightweight smoothing hair oil shine

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

Boar Bristle Smoothing Hair Brush

boar bristle smoothing brush

View

5. Textured Copper Lob with Choppy Bangs

Textured Copper Lob with Choppy Bangs

Isn’t this rich copper lob just so stunning for autumn?? This hairstyle works beautifully on anyone wanting to combine a vibrant, warm color with an effortless, lived-in cut. One thing I love about this style is how the textured bangs frame the eyes while the soft S-waves add plenty of movement. That means you don't have to spend hours perfecting each curl—it actually looks best when it’s a little undone and playful!

How to do this

1. Start on freshly washed towel-dried hair and apply a quarter-sized amount of the lightweight styling mousse listed below to build natural body and hold.

2. Blow dry the bangs straight forward and flat against your forehead using a flat styling brush, sweeping gently side to side to keep them textured and natural.

3. Rough-dry the rest of your hair using your fingers or a diffuser to encourage your natural texture until completely dry.

4. Mist strands lightly with the thermal heat protectant spray listed below to shield your vibrant copper hair from heat styling.

5. Using a 1-inch curling wand, wrap medium vertical sections around the barrel away from the face, leaving about an inch of the ends out to maintain that modern lob edge.

6. Once the curls have completely cooled, rake through them with your fingers to break them into effortless, undone waves.

7. Spritz generously with the dry texturizing spray listed below through the mid-lengths and ends for that piecey, lived-in separation.

8. Finish by warming a pea-sized amount of hair shine serum listed below between your palms and smoothing over flyaways while enhancing the rich red tones.

Products Used

Lightweight Volumizing Styling Mousse

volumizing styling mousse

View

Thermal Heat Protectant Spray

thermal heat protectant spray

View

1-Inch Ceramic Curling Wand

1 inch ceramic curling wand

View

Dry Texturizing Finishing Spray

dry texturizing spray volume

View

Weightless Hair Shine Serum

hair shine serum lightweight

View

Color-Depositing Copper Conditioner

copper color depositing conditioner

View

6. Classic French Braid on Long Copper Hair

Classic French Braid on Long Copper Hair

Nothing beats a classic French braid when you want a style that looks put-together with minimal fuss. It keeps your hair neat and out of your face while showing off all the rich, dimensional tones in your color. If you want a softer look, you can gently tug at the outer edges of each stitch to create extra fullness.

How to do this

1. Thoroughly brush your hair straight back to remove any knots and tangles using the detangling paddle brush listed below.

2. Smooth a small drop of the lightweight hair smoothing oil listed below through your mid-lengths and ends to tame flyaways and enhance glossy shine.

3. Gather a triangular section of hair at the crown of your head and divide it evenly into three equal strands.

4. Cross the right strand over the middle strand, then cross the left strand over the new middle strand to create your base stitch.

5. Before crossing the next strand over, gather a small piece of loose hair from the side of your head and incorporate it into the strand.

6. Repeat this process down the back of your head, taking clean and even horizontal sections from the hairline until all the hair is incorporated at the nape of the neck.

7. Continue braiding down the remaining length in a standard three-strand braid and secure the end with a small clear elastic.

8. Take a tiny section of hair from the tail, wrap it around the elastic to conceal it, and tuck the end under or secure with a small bobby pin.

9. Lightly mist the entire braid with the flexible hold hairspray listed below to lock everything into place without stiffness.

Products Used

Detangling Paddle Brush

detangling paddle brush

View

Lightweight Hair Smoothing Oil

lightweight hair smoothing oil for shine

View

Clear Elastic Hair Bands

clear elastic hair ties small

View

Mini Hair Bobby Pins

mini bobby pins brown

View

Flexible Hold Hairspray

flexible hold lightweight hairspray

View

7. Elegant Polished Low Chignon with Pearl Accents on Copper Hair

Elegant Polished Low Chignon with Pearl Accents on Copper Hair

A polished low chignon never goes out of style, especially when you have a stunning warm copper shade to show off! The smooth crossover tuck keeps things sophisticated and secure, while the delicate sprigs of pearls add just the right amount of bridal romance. If you're heading to a formal event or walking down the aisle, this classic updo lets your neckline and jewelry shine beautifully.

How to do this

1. Start by prepping clean, dry hair with a generous mist of the heat protectant spray listed below, then blow-dry smooth with a round ceramic brush for maximum shine and volume.

2. Gently tease the crown area with a fine-tooth tail comb to build subtle height, then smooth over the top layer using a boar bristle smoothing brush.

3. Separate the front side sections above each ear and clip them away for later.

4. Gather the remaining back hair into a low, loose ponytail at the nape of the neck using a clear elastic band.

5. Create a hollow space above the ponytail elastic, flip the tail up and tuck it inward to roll it into a neat, smooth horizontal chignon bun, anchoring it securely against the scalp with the strong grip bobby pins listed below.

6. Take the side sections you set aside earlier, lightly twist or sweep them backward across the top of the rolled bun, crossing them over to conceal the base of the roll and securing with pins underneath.

7. Carefully tuck the delicate pearl hair pins listed below into the top and sides of the chignon for an ethereal, romantic accent.

8. Lock the entire updo into place and tame any flyaways using the flexible hold finishing hairspray listed below.

Products Used

Heat Protectant Smoothing Spray

heat protectant smoothing spray

View

Boar Bristle Teasing and Smoothing Brush

boar bristle teasing brush

View

Strong Grip Matte Bobby Pins

matte bobby pins for thick hair

View

Bridal Pearl Hair Pins Set

pearl bridal hair pins

View

Flexible Hold High Shine Hairspray

flexible hold finishing hairspray shine

View

8. Vibrant Copper and Jet Black Angled Inverted Bob

Vibrant Copper and Jet Black Angled Inverted Bob

Are you completely obsessed with high-contrast color combos like I am?! I added this fiery copper and jet black stacked bob to the list because it gives off the ultimate sleek, edgy vibe that turns heads instantly. The sharp, steep angle elongates your neckline while the dark peekaboo underneath makes the bright orange-copper tones pop like crazy. It’s such a bold, badass statement cut that’s surprisingly easy to style straight with a good flat iron!

How to do this

1. Start by sectioning damp, clean hair horizontally from temple to temple, clipping the crown up away from the nape.

2. Apply a dime-sized amount of smoothing blowout cream and the heat protectant spray listed below evenly throughout all sections.

3. Using a medium ceramic round brush and a high-velocity ionic hair dryer, blow-dry the bottom black layer inward along the curve of the nape to establish that crisp, stacked baseline.

4. Release the vibrant copper top section and blow-dry forward and downward, beveling the ends slightly inward toward the jawline to create the steep angled silhouette.

5. Section the hair again and pass a titanium flat iron listed below through 1-inch subsections from roots to ends at 360°F for a glass-like, pin-straight finish.

6. Finish the look by misting a lightweight shine spray listed below over the top canopy to accentuate the high-contrast color split and keep flyaways completely tamed.

Products Used

Smoothing Heat Protectant Spray

smoothing heat protectant spray

View

Titanium Flat Iron Hair Straightener

titanium flat iron hair straightener

View

Ceramic Thermal Round Blowout Brush

ceramic thermal round blowout brush

View

High-Gloss Anti-Frizz Shine Mist

high gloss anti frizz shine mist

View

Color-Depositing Copper Hair Mask

copper color depositing hair mask

View

9. Lived-In Copper Wavy Bob

Lived-In Copper Wavy Bob

Oh, this warm copper textured bob has my whole heart! The effortless, undone waves paired with that rich ginger tone are absolute perfection. Have you ever gone bold with a copper color like this?

How to do this

1. Start on freshly washed, damp hair and prep with a lightweight heat protectant spray listed below to shield strands and add slip.

2. Apply a dollop of volumizing mousse through the roots and mid-lengths, then rough blow-dry using a paddle brush until completely dry.

3. Section off the hair and create a relaxed, slightly off-center part.

4. Take a 1.25-inch curling wand listed below and wrap vertical 1-to-2-inch sections away from the face, leaving the last inch of the ends out for a modern, relaxed finish.

5. Alternate curl direction around the sides and back to build natural, tousled dimension.

6. Once the hair has completely cooled, gently rake through the waves with your fingers or a wide-tooth comb to soften them into loose S-bends.

7. Spray the roots and mid-lengths with the texturizing finishing spray listed below to achieve that effortless, lived-in bounce.

Products Used

Thermal Heat Protectant Spray

heat protectant spray

View

1.25-Inch Ceramic Curling Wand

1.25 inch curling wand

View

Dry Texturizing Spray for Tousled Volume

dry texturizing spray volume

View

Volumizing Styling Mousse

volumizing hair mousse

View

Color-Depositing Copper Hair Mask

copper color depositing mask

View

10. Wavy Copper Lob with Pearl Clip Accents

Wavy Copper Lob with Pearl Clip Accents

Oh, a dreamy copper lob with oversized pearl clips, how I love thee. Adding hair accessories to soft, effortless waves makes any everyday cut feel instantly romantic. This is sooo pretty!! Have you ever tried pearl barrettes with a side-parted bob?

How to do this

1. Start by prepping clean, damp hair with a lightweight smoothing blow dry cream using the styling cream listed below to add heat protection and smooth flyaways.

2. Blow dry hair with a medium round brush, lifting at the roots to maintain natural body and movement.

3. Create a deep, clean side part using the fine-tooth rat tail comb listed below, aligning the part with the arch of your eyebrow.

4. Take 1 to 2-inch vertical sections of hair and wrap them around a 1.25-inch curling iron using the curling wand listed below for just a few seconds to create soft, relaxed, lived-in S-waves, leaving the ends slightly undone.

5. Mist a light spray of texture spray all over and gently finger-comb through the waves to break them up for a soft finish.

6. Smooth down the hair on the parted side above the ear and secure two pearl-embellished barrettes parallel to each other using the pearl hair clip set listed below.

7. Finish with a gentle mist of flexible hold hairspray using the flexible hold hairspray listed below to lock everything in place without stiffness.

Products Used

Heat Protectant Smoothing Blow Dry Cream

smoothing blowout cream heat protectant

View

1.25 Inch Ceramic Curling Iron Wand

1.25 inch curling iron wand

View

Faux Pearl Barrette Clip Set

pearl hair clips barrettes for women

View

Fine-Tooth Parting Rat Tail Comb

rat tail comb for parting hair

View

Flexible Hold Finishing Hairspray

lightweight flexible hold hairspray

View

11. Luxe Copper Hollywood S-Waves for Long Hair

Luxe Copper Hollywood S-Waves for Long Hair

These lush, glossy copper waves are pure fairytale magic! I am obsessed with how smooth and structured each wave falls—it gives total romantic vintage glam without looking stiff. Have you ever tried classic brushed-out waves like this?

How to do this

1. Start by prepping clean, towel-dried hair with the heat protectant spray listed below to shield strands and add a silky base.

2. Blow dry hair smooth using a round ceramic brush to build body and eliminate frizz.

3. Create a clean, defined center part using a fine-tooth tail comb.

4. Section hair into horizontal tiers and curl 1- to 1.5-inch sections in the exact same direction around a large-barrel curling iron using the 1.25 inch curling iron listed below to ensure the waves marry together.

5. Clip each warm curl in place with setting clips and let them cool completely to lock the structural wave memory in place.

6. Remove clips and gently brush through the curls from scalp to ends using the boar bristle paddle brush listed below to transform individual curls into a cohesive, fluid S-wave pattern.

7. Apply a tiny drop of the lightweight hair shine serum listed below over the surface to tame any flyaways and boost that glossy copper sheen.

8. Mist the entire look with the flexible hold finishing hairspray listed below to keep every wave smooth and sculpted all day.

Products Used

Heat Protectant Smoothing Spray

heat protectant smoothing spray

View

1.25 Inch Ceramic Curling Iron

1.25 inch ceramic curling iron

View

Boar Bristle Finishing Paddle Brush

boar bristle finishing paddle brush

View

Lightweight Hair Glossing Serum

hair glossing shine serum

View

Flexible Hold Anti-Humidity Hairspray

flexible hold anti humidity hairspray

View

12. Romantic Copper Low Chignon with Wavy Face-Framing Tendrils

Romantic Copper Low Chignon with Wavy Face-Framing Tendrils

I am completely obsessed with this romantic bridal updo! There is something so effortlessly chic about sweeping hair into a low, gathered bun while leaving those soft, wavy tendrils to frame your cheekbones. If you've got an outdoor wedding, date night, or formal event coming up, this look gives you that timeless fairytale vibe without feeling stiff or overly done.

How to do this

1. Prep dry, clean hair with a light mist of the heat protectant spray listed below to shield strands from hot styling tools.

2. Use the 1.25-inch curling iron listed below to add soft, loose bends through the mid-lengths and ends, especially focusing on the front sections.

3. Part the hair down the center and gently section out two romantic tendrils around the face on either side.

4. Gather the rest of the hair towards the nape of the neck into a low, relaxed ponytail using the clear hair elastics listed below.

5. Twist and tuck the ponytail loosely into a soft textured chignon, securing it in place with the matte bobby pins listed below.

6. Gently tug at the crown and sides of the bun to create soft volume and an effortless, lived-in shape.

7. Finish by defining the front face-framing curls and locking the style in place with a flexible hold finishing hairspray.

Products Used

Heat Protectant Spray with Argan Oil

heat protectant spray argan oil

View

1.25-Inch Ceramic Curling Wand Iron

1.25 inch ceramic curling iron

View

Clear Elastic Hair Ties

clear elastic hair ties

View

Matte Finish Bobby Pins for Updos

matte bobby pins updo

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

13. Warm Copper Wavy Bob

Warm Copper Wavy Bob

This copper wavy bob is honestly everything for fall and winter! It has that effortless French-girl bounce that frames the jawline so perfectly, and the warm red tones catch the light like crazy. If you’ve been thinking about chopping your hair into a short, stylish cut, this is definitely your sign to go for it!

How to do this

1. Start by prepping damp hair with a lightweight heat protectant spray using the heat protectant spray listed below to shield your strands from heat damage.

2. Blow dry the hair smooth using a round brush or paddle brush to create a smooth, frizz-free base with natural body.

3. Section the hair into horizontal tiers, starting from the nape of the neck up to the crown.

4. Take 1- to 2-inch vertical sections and clamp a 1-inch curling iron or flat iron horizontally to create an alternating S-wave ribbon effect down the length of each section using the ceramic curling wand listed below.

5. Leave the very ends slightly straight for a modern, chic bob shape rather than a rounded curl.

6. Once all sections are cooled completely, gently rake through the waves with your fingers or a wide-tooth detangling comb using the wide-tooth comb listed below to merge them into soft, fluid ripples.

7. Mist a light coat of texturizing spray through the mid-lengths for airy definition using the texturizing finishing spray listed below.

8. Finish with a drop of nourishing hair oil smoothed over flyaways and ends to add mirror-like shine and keep the copper tones looking rich and healthy using the shine-enhancing hair oil listed below.

Products Used

Heat Protectant Spray

thermal heat protectant spray

View

1-Inch Ceramic Curling Wand

1 inch ceramic curling wand iron

View

Wide-Tooth Detangling Comb

wide tooth comb for wavy hair

View

Dry Texturizing Finishing Spray

dry texturizing spray volume

View

Shine-Enhancing Hair Oil

lightweight hair oil for shine and frizz

View

14. Copper Shag Lob with Textured Wispy Fringe

Copper Shag Lob with Textured Wispy Fringe

If you want that effortlessly cool rock-and-roll vibe without spending an hour styling, this layered copper shag is pure magic! The choppy layers do all the heavy lifting, giving you instant volume and movement with just a little texturizing spray. Plus, that rich, fiery copper tone brings so much warmth and edge to the whole look!

How to do this

1. Start by prepping damp hair with a lightweight styling mousse to give your layers natural grit and volume.

2. Blow-dry using a concentrator nozzle and a round ceramic brush, focusing on lifting the roots at the crown to build that effortless 70s rock-and-roll volume.

3. Blow-dry the bangs forward and slightly curled under, using your fingers or a mini round brush to feather them outward at the edges.

4. Once hair is completely dry, mist with a heat protectant spray before using a 1.25-inch curling wand or flat iron to add loose, undone bends. Leave the very ends straight for that signature shag silhouette.

5. Flip your head upside down and thoroughly spray with the dry texturizing spray listed below to break up the waves and amp up the airy separation.

6. Work a pea-sized amount of the matte styling wax listed below between your fingertips and pinch the ends of your bangs and face-framing layers for that defined, lived-in finish.

Products Used

Dry Texturizing Finishing Spray

dry texturizing spray hair volume

View

Color-Depositing Copper Hair Mask

copper color depositing hair mask

View

Volumizing Root Lift Mousse

volumizing hair styling mousse

View

Ceramic 1.25 Inch Curling Wand

ceramic curling wand 1.25 inch

View

Matte Finish Styling Pomade

matte styling wax pomade for hair

View

15. Voluminous Copper Lob Blowout with Feathered Layers

Voluminous Copper Lob Blowout with Feathered Layers

This copper blowout is ridiculously stunning and full of life! The bouncy feathered ends and curtain sweep frame the face so effortlessly, giving major 90s supermodel vibes. If you've been wanting to try rich red or copper tones on medium-length hair, this shape and color combination will make your hair look so thick, healthy, and gorgeous!

How to do this

1. Start with clean, damp hair and apply a dollop of the volumizing styling mousse listed below evenly through your roots and mid-lengths to build lasting body.

2. Mist hair generously with the thermal heat protectant spray listed below to shield your strands and keep your copper color vibrant.

3. Rough-dry your hair upside down until it is about 80% dry, lifting at the roots with your fingers for extra volume.

4. Section hair into horizontal rows, taking 2-inch wide pieces, and blow dry using the large ceramic round brush listed below, rolling the brush outward away from your face for the bangs and rolling inward at the ends to create those luscious bouncy curves.

5. Set each warm section on the jumbo velcro rollers listed below for 15 to 20 minutes until completely cool to lock in the bouncy shape.

6. Unroll gently, shake out the curls with your fingers, and warm a drop of the lightweight smoothing hair oil listed below between your palms to smooth flyaways and add mirror-like shine.

7. Finish with a flexible mist of the medium hold finishing hairspray listed below to keep this fabulous bouncy blowout held all day long.

Products Used

Volumizing Root Lift Styling Mousse

volumizing hair mousse root lift

View

Thermal Heat Protectant Spray

thermal heat protectant spray

View

Large Ceramic Ionic Round Brush

large ceramic round hair brush

View

Jumbo Self-Grip Velcro Hair Rollers Set

jumbo velcro rollers for blowout

View

Lightweight Smoothing Argan Hair Oil

lightweight smoothing hair oil

View

Color-Depositing Copper Mask

copper color depositing hair mask

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

16. Retro 1950s Flipped Copper Bob

Retro 1950s Flipped Copper Bob

There’s nothing like rockin’ a vibrant copper retro flip while heading out to the diner! I love how this clean vintage curl bounces right at the collarbone and frames your face without having to worry about messy layers.

How to do this

1. Start by prepping damp, freshly washed hair with the smoothing blowout cream listed below to lock in a sleek texture and eliminate frizz.

2. Create a clean, precise deep side part using the tail comb listed below, lining it up nicely with the arch of your eyebrow.

3. Blow dry your hair smooth using a round boar bristle brush, making sure to lift at the root on the heavier side for that gentle vintage swoop.

4. Once completely dry, mist each section with the thermal heat protectant spray listed below to shield your strands before heat styling.

5. Take medium sections of hair and use the 1.25-inch curling iron listed below to curl the ends upwards and outwards into structured, exaggerated wing-like flips.

6. Roll the flipped ends onto the large jumbo hot rollers listed below while they cool to lock in that bouncy, curved pageboy silhouette.

7. Gently brush through the flips with a paddle brush, then finish off with a generous spritz of the extra-firm vintage hold hairspray listed below to keep everything frozen in retro perfection.

Products Used

Smoothing Blowout Cream

smoothing blowout cream anti frizz

View

Tail Comb with Metal Pin

rat tail comb metal pin parting

View

Thermal Heat Protectant Spray

thermal heat protectant spray

View

1.25 Inch Ceramic Curling Iron

1.25 inch curling iron ceramic

View

Extra-Firm Hold Hairspray

extra firm hold finishing hairspray vintage

View

17. Bouncy Copper Blowout with Face-Framing Layers

Bouncy Copper Blowout with Face-Framing Layers

This warm copper blowout gives the ultimate glossy, effortless vibe that instantly elevates your everyday routine — I wore this style for brunch and work meetings and got so many compliments on the shine!

How to do this

1. Start with clean, damp hair and prep from mid-lengths to ends using the heat protectant blowout cream listed below to smooth frizz and add thermal protection.

2. Apply a dollop of volumizing mousse at the roots using the weightless root lifting mousse listed below to create natural lift through the crown.

3. Section hair horizontally into manageable layers, clipping the top sections up out of the way.

4. Blow dry each section using a large round ceramic barrel brush listed below, rolling the ends upward and inwards to achieve that bouncy, curved flick.

5. For the face-framing layers, over-direct the hair forward and roll backwards away from the face with the round brush to create soft curtain curves around the cheekbones.

6. Once fully dry, warm a drop of the nourishing hair finishing oil listed below between your palms and lightly smooth over ends for high shine and sleek polish.

7. Lock in the bounce and movement with a light mist of the flexible hold hairspray listed below.

Products Used

Heat Protectant Blowout Cream

heat protectant blowout smoothing cream

View

Large Round Ceramic Barrel Brush

large round ceramic barrel brush blowout

View

Weightless Root Lifting Mousse

weightless root lifting volumizing mousse

View

Nourishing Hair Finishing Oil

nourishing hair oil shine lightweight

View

Flexible Hold Hairspray

flexible hold light hairspray

View

18. Romantic Half-Up Braided Lob for Copper Waves

Romantic Half-Up Braided Lob for Copper Waves

Isn’t this half-up braided lob just the sweetest look? It’s perfect for collarbone-length cuts that you want to keep out of your eyes without losing that pretty, flowing silhouette. One thing I love about this hairstyle is how effortlessly it pairs with loose, natural waves! It feels so whimsical and easygoing, making it an absolute go-to for outdoor dates, sunny afternoons, or casual weddings.

How to do this

1. Start with naturally dried or gently blow-dried hair, misting all over with a light heat protectant spray.

2. Use a medium-barrel curling wand to create soft, lived-in S-waves throughout the hair, leaving the ends slightly undone for an effortless vibe.

3. Create a clean side part, then separate a small one-to-two-inch section of hair along the hairline near the temple.

4. Plait this section into a neat three-strand braid, weaving back across the side of the head towards the crown.

5. Secure the braid at the back of the head using clear mini elastic bands and pin it discreetly under the top layers with bobby pins.

6. Lightly tug on the loops of the braid to pancake and soften it, pulling out a delicate face-framing tendril around the cheekbone.

7. Finish by spritzing a flexible-hold hairspray and texturizing sea salt spray through the lengths to lock in texture and gentle movement.

Products Used

Heat Protectant Spray

heat protectant spray

View

1.25 Inch Ceramic Curling Wand

curling wand 1.25 inch

View

Clear Elastic Hair Ties

clear elastic hair ties

View

Matte Bobby Pins

bobby pins blonde brown

View

Texturizing Sea Salt Spray

texturizing sea salt spray

View

Flexible Hold Hairspray

flexible hold hairspray

View

19. Lush Copper Classic Chin-Length Bob Blowout

Lush Copper Classic Chin-Length Bob Blowout

Are you completely obsessed with rich copper tones and chic short bobs like I am?! I added this chin-length voluminous bob to the list because it gives off such an effortless, cozy, yet ultra-polished vibe, don’t you think?! You can style it with a dramatic sweeping side part for extra root volume like this, or keep it center-parted and sleek for a totally modern, minimalist look. It's the ultimate fresh haircut to show off warm autumn tones, healthy shine, and effortless volume every single day!

How to do this

1. Start on freshly washed, damp hair and apply a quarter-sized amount of the volumizing root lift mousse listed below directly at your roots for bouncy fullness.

2. Mist your mid-lengths and ends with the heat protectant spray listed below to shield hair from blow-dryer damage while locking in that fiery copper shine.

3. Section the hair into manageable horizontal layers, starting from the nape of the neck up to the crown.

4. Blow dry using the ceramic round blowout brush listed below, directing the airflow down the hair shaft and rolling the ends under slightly to create that soft, chin-hugging curve.

5. For the top section, flip your hair into a sweeping side part and lift vertically at the root with your round brush to achieve that effortless, swoop-over volume at the crown.

6. Once dry, smooth a tiny drop of the lightweight nourishing hair serum listed below through the ends to tame flyaways and enhance glossy reflection.

7. Finish with a quick spritz of the flexible hold hairspray listed below to keep the bounce and shape locked in all day without feeling stiff.

Products Used

Volumizing Root Lift Mousse

volumizing root lift mousse

View

Thermal Heat Protectant Spray

thermal heat protectant spray

View

Ceramic Thermal Round Blowout Brush

ceramic round brush for blowout

View

Lightweight Nourishing Hair Serum

lightweight hair serum for shine

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

20. Voluminous Copper High Ponytail with Soft Waves

Voluminous Copper High Ponytail with Soft Waves

This high ponytail is seriously the ultimate go-to when you want something effortless but super elevated! I love how full and bouncy the waves look, especially with that vibrant copper tone catching the light. Leaving those face-framing pieces out in front softens the whole look and makes it so flattering for any casual day out!

How to do this

1. Start by prepping damp hair with a lightweight styling mousse and rough dry to enhance your natural body and texture.

2. Add loose, relaxed bends throughout the hair with a 1.25-inch curling iron, making sure to leave the ends slightly straight for a lived-in feel.

3. Mist all over using the texturizing spray listed below to add grit, lift, and volume before gathering.

4. Pull out a few soft, wispy tendrils around your face and temples to frame your features naturally.

5. Sweep the rest of your hair up toward the crown into a high ponytail and secure it tightly using the no-crease hair elastic listed below.

6. Take a small piece of hair from underneath the ponytail, wrap it around the hairband to conceal it, and pin it in place with a bobby pin.

7. Gently pinch and tease the base of the ponytail with a styling brush to boost maximum volume and fullness.

8. Finish the style by setting it with a flexible hold hairspray listed below to keep the flyaways in check while maintaining effortless movement.

Products Used

Dry Texturizing Finishing Spray

dry texturizing spray

View

1.25 Inch Ceramic Curling Iron

1.25 inch curling iron

View

No-Crease Strong Hold Hair Elastics

strong hold hair elastics

View

Flexible Hold Working Hairspray

flexible hold hairspray

View

Copper Hair Gloss Color Enhancing Conditioner

copper hair gloss conditioner

View

21. Golden Amber Wavy Lob with Blunt Ends

Golden Amber Wavy Lob with Blunt Ends

Can we just talk about how stunning warm golden tones look on a blunt cut?! I’m completely obsessed with this golden ginger lob because it’s the ultimate cool-girl look that still feels totally wearable and fresh. The relaxed S-waves give it that effortless, European street style flair without looking overly styled, and the blunt bottom edge keeps the hair looking super thick and healthy. Whether you pair it with a cozy oversized knit or a classic denim jacket like this, it’s bound to turn heads all season long!

How to do this

1. Start by washing and towel-drying your hair, then apply a dime-sized amount of the lightweight heat protectant cream listed below throughout your mid-lengths and ends.

2. Blow dry using a paddle brush or rough-dry with your fingers, lifting gently at the roots to maintain natural body without too much stiffness.

3. Create a soft off-center or side part to give the crown a casual, effortless sweep.

4. Take vertical 1.5-inch sections and use the 1.25-inch curling iron listed below to create subtle, undulating bends rather than tight ringlets, alternating direction and leaving the very ends straight for a modern blunt finish.

5. Let the bends cool completely, then mist hair generously with the dry texturizing spray listed below to add grit, separation, and airy volume.

6. Gently rake through the waves with your fingers or the wide-tooth detangling comb listed below to soften the pattern.

7. Finish the style by smoothing a tiny drop of the lightweight hair styling oil listed below through the tips for shine and frizz control.

Products Used

Lightweight Heat Protectant Cream

lightweight heat protectant cream for hair

View

1.25-Inch Ceramic Curling Iron

1.25 inch ceramic curling iron

View

Dry Texturizing Spray for Volume

dry texturizing spray for volume

View

Wide-Tooth Detangling Comb

wide tooth detangling comb

View

Lightweight Hair Styling Oil

lightweight nourishing hair styling oil

View

22. Effortless Copper Wavy Lob with Side-Swept Volume

Effortless Copper Wavy Lob with Side-Swept Volume

Thinking about making the jump to a fiery shade? This tousled copper lob is proof that vibrant red hair and a relaxed, shoulder-skimming cut are a match made in heaven. It gives you plenty of natural bounce and that coveted 'I woke up like this' texture without hours in front of the mirror. Ready to embrace your inner redhead?

How to do this

1. Start by prepping towel-dried hair with a lightweight volumizing mousse to provide root lift and body.

2. Mist hair with the heat protectant spray listed below to shield your strands before heat styling.

3. Blow-dry using a round ceramic brush, lifting at the roots to maximize volume, especially around the side part.

4. Take random 1- to 2-inch vertical sections and loosely wrap them around a 1.25-inch curling wand, leaving the last inch of the ends uncurled for an effortless, modern shape.

5. Alternate the direction of each curl towards and away from the face to create natural, undone movement.

6. Once the curls have cooled, rake through them gently using a wide-tooth detangling comb to break up the pattern into soft waves.

7. Finish by shaking the texturizing spray listed below through the mid-lengths and roots for that perfectly lived-in, bouncy hold.

Products Used

Heat Protectant Spray

thermal heat protectant spray hair

View

Dry Texturizing Spray

dry texturizing spray volume

View

Volumizing Hair Mousse

volumizing hair mousse for body

View

1.25-Inch Ceramic Curling Wand

1.25 inch curling wand

View

Color-Depositing Copper Conditioner

copper color depositing conditioner

View

23. Vibrant Copper Blowout with Effortless Volume

Vibrant Copper Blowout with Effortless Volume

The fiery copper blowout. What a showstopper! I love how the bold, vibrant tone instantly elevates a relaxed, layered cut without needing hours of intricate styling. It's chic, full of natural body, and completely turns heads whether you're heading to the office or out for the evening.

How to do this

1. Start by prepping freshly washed, damp hair with a lightweight heat protectant spray to protect your vibrant copper color and seal the cuticle.

2. Apply a dollop of volumizing root mousse directly onto the roots and crown using the volumizing root lift mousse listed below to get that airy, lifted shape.

3. Blow dry your hair upside down until it is about 80% dry, then flip over and use a large ceramic round brush to smooth out the lengths while lifting upward at the scalp.

4. Create a deep side part and roll the front top section backward with the round brush, letting it cool in a large roller to establish that gorgeous cascading swoop.

5. Once cooled, release the roller and use your fingers to gently shake out the hair and break up any stiffness.

6. Mist a light coat of texturizing spray through the mid-lengths and ends using the dry texturizing spray listed below to give it that effortless, piecey definition.

7. Finish by rubbing a single drop of hair smoothing serum between your palms and smoothing over any stray flyaways around the hairline.

Products Used

Color-Safe Heat Protectant Spray

color safe heat protectant spray

View

Volumizing Root Lift Mousse

volumizing root lift mousse

View

Ceramic Round Blowout Hair Brush

large ceramic round brush blowout

View

Dry Texturizing Spray for Volume

dry texturizing spray volume

View

Copper Color Depositing Hair Mask

copper color depositing mask

View

24. Fiery Copper Curly Lob with Bouncy Bangs

Fiery Copper Curly Lob with Bouncy Bangs

Isn’t this halo of copper curls absolutely breathtaking to look at?? The combination of bouncy 3B ringlets and curly bangs gives this medium-length cut so much personality and fun. One thing I love about this hairstyle is how alive and vibrant the color feels, especially in natural sunlight! If you have natural ringlets and want a fresh, playful shape that frames your face, this layered curly lob is pure perfection.

How to do this

1. Start on freshly cleansed, soaking-wet hair after conditioning with a rich moisturizing conditioner.

2. Rake a generous amount of the curl defining cream listed below through your strands from roots to tips to lock in hydration.

3. Coat your curls with a layer of the strong-hold curl defining gel listed below using the praying hands method to create a cast and prevent frizz.

4. Gently scrunch your hair upwards toward the scalp with a microfiber towel to encourage natural ringlet formation and remove excess moisture.

5. Use a blow dryer attached to the collapsible hair diffuser listed below on low heat and low airflow, cupping curls toward your head until fully dry.

6. Once 100% dry, break the gel cast by gently scrunching in a few drops of the lightweight nourishing hair oil listed below for incredible shine and softness.

7. Fluff at the roots using the wide-tooth afro pick comb listed below to build maximum crown volume and show off those stunning curly bangs!

Products Used

Hydrating Curl Defining Cream

curl defining cream for curly hair

View

Strong Hold Anti-Frizz Curl Gel

anti frizz curl styling gel

View

Lightweight Jojoba & Argan Hair Oil

nourishing hair oil for curls

View

Universal Collapsible Hair Diffuser Attachment

hair dryer diffuser attachment curly hair

View

Microfiber Anti-Frizz Hair Towel

microfiber hair drying towel wrap

View

Volumizing Metal Afro Pick Comb

afro pick metal comb for curly hair volume

View

25. Intricate Celtic Knot Half-Up Braid on Wavy Copper Hair

Intricate Celtic Knot Half-Up Braid on Wavy Copper Hair

This hairstyle is what I like to call the fantasy Celtic princess crown. You start by prepping your hair into soft, polished waves so the flowing sections have plenty of romantic movement. Then, take two balanced side braids from the front, bring them around to the back, and weave them into an interlocking Celtic macramé knot. Pin it securely in place and let the woven tail cascade straight into your loose hair for a majestic, storybook look.

How to do this

1. Start by prepping clean, dry hair with a generous mist of heat protectant spray using the heat protectant spray listed below to shield your strands.

2. Use a large 1.25-inch curling iron to add loose, flowing waves throughout the lower lengths, then gently comb through them using the wide-tooth detangling comb listed below for soft texture.

3. Apply a small dab of smoothing hair styling cream using the styling cream listed below to your fingertips to keep flyaways at bay while braiding.

4. Take two side sections of hair from above each temple, create two neat, multi-strand plaits, and bring them together toward the back center of your head.

5. Carefully loop and weave the strands over and under one another in a symmetrical Celtic knot pattern, securing key crossover points with bobby pins using the matte finish bobby pins listed below hidden neatly underneath.

6. Combine the tails of the knot into a central downward fishtail or three-strand plait, blending it gracefully into the loose wavy lengths below.

7. Finish the entire style by locking the intricate knotwork in place using the flexible hold hairspray listed below for a long-lasting, picture-perfect hold.

Products Used

Heat Protectant Spray with Argan Oil

heat protectant spray argan oil

View

Wide-Tooth Detangling Comb

wide tooth detangling comb

View

Smoothing Anti-Frizz Hair Styling Cream

smoothing hair styling cream anti frizz

View

Matte Finish Bobby Pins for Red Hair

bobby pins copper bronze red hair

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

26. Romantic Copper Braided High Bun Updo

Romantic Copper Braided High Bun Updo

Honestly, there is nothing quite as breathtaking as fiery copper hair swept into an effortless romantic updo! The Dutch side braid creates gorgeous structure along the profile while leaving that voluminous, tousled bun to steal the show. It’s got that fairy-tale, Renaissance-meets-modern aesthetic that feels special without ever trying too hard.

How to do this

1. Start by prepping your dry hair with a generous mist of the texturizing volume spray listed below to add grip and fullness before styling.

2. Add loose curls and waves throughout your entire head using the ceramic curling wand listed below, alternating directions to build plenty of dimension.

3. Section off a 2- to 3-inch section of hair along the front hairline starting near your part or temple to create the accent braid.

4. Begin a Dutch lace braid along the side of your hairline, crossing strands underneath and adding small sections primarily from the top so it pops outward cleanly.

5. Continue braiding toward the crown, then gently pancake the braid loops with your fingers to make it look chunky, soft, and textured.

6. Gather the remaining lengths into a high, loose ponytail at the upper crown using a snag-free elastic band.

7. Twist and loop sections of the ponytail into a full, voluminous messy bun, securing pieces organically with the matte bobby pins listed below.

8. Pin the end of your side braid directly into the base of the bun to blend it seamlessly into the shape.

9. Pull a delicate tendril free near the nape of the neck or ear, and finish the entire look with a cloud of the flexible hold hairspray listed below.

Products Used

Texturizing Volume Spray

texturizing volume spray

View

1-Inch Ceramic Curling Wand

1 inch ceramic curling wand

View

Snag-Free Clear Hair Elastics

clear hair elastics

View

Matte Finish Bobby Pins

matte bobby pins for thick hair

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

27. 70s-Inspired Feathered Copper Lob with Brow-Skimming Bangs

70s-Inspired Feathered Copper Lob with Brow-Skimming Bangs

I am completely obsessed with this rich copper feathered cut! The way the face-framing layers curve effortlessly back around the cheekbones gives such an iconic, effortless 70s rock-chic vibe. It pairs so beautifully with those full, soft bangs that skim right across the eyebrows without overwhelming the face.

How to do this

1. Start with clean, damp hair and apply a generous mist of the heat protectant spray listed below from mid-lengths to ends.

2. Work a quarter-sized amount of the smoothing blowout cream listed below through your damp strands to ensure frizz-free shine and silky movement.

3. Section off your bangs and blow-dry them first using the round ceramic brush listed below, rolling forward and slightly under to give them a gentle rounded curve that hugs the brow.

4. Divide the rest of your hair into manageable horizontal layers. Using a medium barrel round brush and hair dryer, bevel the ends under and softly backwards to enhance the feathered face-framing layers.

5. Once fully dry, mist lightly with the dry texturizing spray listed below at the crown and layers, gently fluffing with your fingers to build lived-in volume.

6. Finish the look by applying a tiny drop of the lightweight hair serum listed below through the tips for high-gloss shine and smoothness.

Products Used

Heat Protectant Spray with Argan Oil

heat protectant spray with argan oil

View

Smoothing Blowout Cream

smoothing blowout cream

View

Round Ceramic Styling Brush

round ceramic hair styling brush

View

Dry Texturizing Finishing Spray

dry texturizing finishing spray

View

Lightweight High-Shine Hair Serum

lightweight hair shine serum

View

28. Romantic Copper Half-Up Braided Bridal Hairstyle

Romantic Copper Half-Up Braided Bridal Hairstyle

A stunning boho-chic half-up crown braid that flows effortlessly into a textured pull-through braid. The rich warm copper shade paired with cascading loose waves gives major ethereal fairytale vibes—honestly perfect for an autumn bride or bridesmaid looking for something elegant yet effortless.

How to do this

1. Start by prepping clean, dry hair with a heat protectant spray to protect your strands before curling.

2. Use a 1.25-inch curling iron to curl the bottom lengths of your hair, alternating directions for a loose, romantic wave, then gently comb through with a wide-tooth comb.

3. Lightly mist the crown with the dry texturizing spray listed below to give your hair grip and subtle volume.

4. Take a 2-inch section of hair from above the left temple and create a reverse Dutch or French braid traveling along the side towards the back of the head, securing temporarily.

5. Repeat the exact same braid on the right side and pin or band both braids together securely at the center back of the crown.

6. Beneath where the crown braids meet, take alternating side strands to construct a pull-through faux fishtail braid down the middle, fastening each loop with clear mini elastic bands.

7. Gently pancake and tug out the outer edges of the braid sections to make them look wide, full, and dimensional.

8. Take a tiny strand of hair to wrap around the bottom clear elastic to conceal it completely, pinning it underneath.

9. Finish the entire style with a generous spritz of flexible hold hairspray listed below to ensure your bridal waves stay in place all day.

Products Used

Thermal Heat Protectant Spray

thermal heat protectant spray

View

1.25-Inch Ceramic Curling Iron

1.25 inch curling iron

View

Dry Texturizing Spray for Volume

dry texturizing spray

View

Clear Mini Elastic Hair Ties

clear mini elastic hair ties

View

Flexible Hold Finishing Hairspray

flexible hold finishing hairspray

View

Color-Safe Copper Shampoo

copper color depositing shampoo

View

29. Tousled Fiery Copper Bob with Side-Swept Bangs

Tousled Fiery Copper Bob with Side-Swept Bangs

If you've been wanting to try red hair, this is your sign! A vibrant, rich copper shade paired with a textured bob and soft side bangs gives you that ultimate cozy, effortless vibe that looks stunning in any light.

How to do this

1. Start on freshly washed, towel-dried hair and prep your strands using the heat protectant spray listed below to shield hair and add light slip.

2. Apply a golf-ball sized dollop of the volumizing mousse listed below through the roots and mid-lengths to build airy body and lift.

3. Rough-dry your hair using a blow dryer and the round ceramic brush listed below, sweeping the fringe to the side and lifting the root area for maximum crown volume.

4. Take random 1- to 2-inch vertical sections and wrap them loosely around the 1-inch curling iron listed below, alternating curl directions and leaving the bottom ends straight for that relaxed, modern bob silhouette.

5. Once cooled, break up the waves by gently shaking them out with your fingers, then mist generously with the texturizing finishing spray listed below to achieve separation, movement, and an effortless matte-satin hold.

Products Used

Thermal Heat Protectant Spray

thermal heat protectant spray

View

Lightweight Volumizing Styling Mousse

volumizing hair mousse

View

1-Inch Ceramic Curling Iron Wand

1 inch ceramic curling iron

View

Dry Texturizing Finishing Spray

dry texturizing spray volume

View

Color-Depositing Copper Hair Mask

copper color depositing mask

View

30. Warm Copper Wavy Lob with Effortless Birkin Bangs

Warm Copper Wavy Lob with Effortless Birkin Bangs

I think a rich copper lob is one of the most flattering ways to brighten up your features, especially when paired with full, lash-skimming bangs. The soft, undone S-waves keep the collarbone length feeling fresh and effortless rather than overly styled. It's such a gorgeous, everyday look that transitions seamlessly from casual daytime wear to an evening date night!

How to do this

1. Start on freshly washed hair and apply a quarter-sized amount of the lightweight heat protectant smoothing lotion listed below through your damp mid-lengths and ends.

2. Blow dry your fringe forward using a small ceramic round brush and a concentrator nozzle, sweeping down and slightly curling the tips under so they skim your eyebrows effortlessly.

3. Rough-dry the rest of your hair until it's completely dry, then mist lightly with the thermal protection styling mist listed below.

4. Take 1.5-inch vertical sections and wrap them loosely around a 1.25-inch ceramic curling wand listed below, leaving the last inch of your ends straight for that relaxed, modern lob shape.

5. Alternate the direction of your waves away from the face along the front sides to keep the frame open and flattering.

6. Once the hair has fully cooled, gently rake through the waves with your fingers or a wide-tooth detangling comb to break up the pattern.

7. Finish by spritzing the dry texturizing volume spray listed below into your roots and mid-lengths, followed by a pea-sized drop of color-protecting hair shine serum listed below worked over the tips.

Products Used

Lightweight Heat Protectant Smoothing Lotion

lightweight heat protectant smoothing lotion

View

1.25-Inch Ceramic Curling Wand

1.25 inch ceramic curling wand

View

Dry Texturizing Volume Spray

dry texturizing spray volume

View

Small Ceramic Round Hairbrush

small ceramic round blow dry brush

View

Color-Protecting Hair Shine Serum for Red Hair

color protect hair shine serum

View
Matchmaker

Find Your Perfect Hair

Not sure which ideas work best for your face shape? Take our 60-second visual consultation.

Question 1 of 4

Current or desired length?

Tap an image to select.

ANY
Surprise MeSkip this
Short/Pixie
Short/PixieSelect
Bob
BobSelect
Shoulder Length
Shoulder LengthSelect
Long
LongSelect

Find Hair Ideas By Category