Straightforward Hack to Grasp Artwork Completely Straight

Grasp artwork simply with this painter’s tape hack!

Should you’ve ever struggled hanging artwork or mirrors with a couple of hook on the again, this beneficial little trick is for you!

We have all been there — if you do not get the holes drilled completely within the wall, the whole lot is wonky.

That is particularly useful on bigger gadgets which have a protracted expanse between the hooks, longer than a typical 24 inch degree.

It is also good while you’re attempting to hold heavy gadgets like mirrors. Lifting it time and again to search out that your holes aren’t completely spaced is a significant ache:

It will even be GREAT for a gallery wall while you’re utilizing the identical sort of body time and again. The hooks ought to be the identical distance on every body. 😉

I first used this straightforward artwork hanging trick years in the past once I was transforming our son’s rest room. I bought these IKEA mirrors for the lavatory renovation:

This publish could comprise affiliate hyperlinks in your comfort.

I’ll earn a small fee when you make a purchase order by way of hyperlinks.

They’re the Stockholm mirrors and are so fairly! I nonetheless hope to make use of one in every of these once more in our present dwelling!

They’re fairly giant so the holes on the again had been far aside. You should use a degree, however most are 24 inches or shorter. Despite the fact that we’ve got a 4 foot degree, I discovered this trick to be way more exact than measuring and attempting to switch that measurement onto the wall.

As a result of I used to be drilling into tile I needed this to be as actual as doable. This little hack is fairly straightforward.

You may must seize some painter’s tape (or any masking tape) and place it throughout the holes on the again of your artwork or mirror:

Art or mirror hanging trick with painter's tape

This publish could comprise affiliate hyperlinks in your comfort.

Ensure the tape is positioned on the similar spot on both sides. (That means the identical distance from the highest of the tape.) Then I poked a gap by way of the painter’s tape:

You can too mark it with a pen for a actually exact measurement.

Subsequent, peel off your tape and place it the place you need on the wall. You may nonetheless want a level for this half, however the good factor is nearly any degree will work. You do not want a brilliant lengthy one to test how degree your tape is.

Maintain it towards the tape to test. Regulate the tape accordingly:

Then you definately simply drill, utilizing your marks as a information!

Should you’re drilling proper into drywall or wooden, you may simply want a screw or nail for lighter artwork, or anchors for heavier gadgets. These screw in anchors save a ton of time!

On this specific venture, I needed to drill into tile, which is all the time nerve-racking! When drilling into tile you must use a bit particularly for this job — this tile and glass drill bit set is what I’ve.

I like that they embody 4 completely different sizes:

It takes awhile to get by way of the tile — you may want some endurance and a totally charged drill. 😉

Then you may insert your anchors or screws and grasp your merchandise! Take care and be affected person when screwing into tile, even after the opening has been added.

Once more, I’ve all the time measured with tape or a degree however I discovered this to be way more exact. I wasn’t going to fiddle with this tile!: